UTILITY CHEMICALS SUPPLY
Scaling in boilers is caused by deposits or precipitates of undissolved particulates present in water, directly affecting in heat transfer mechanism.
We have supplied Indian Chemtex’s boiler descaling chemicals which helps break down up of existing scale, safeguarding water heater, pipes, shower heads, and appliances without the expense and hassle of salt of extensive range of chemicals used in traditional hard water systems. Also we are suppling Unitor brand, Drew marine brand and Nallfleet brand chemicals.
1.CARBONCLEAN LT 25 LTR and CARBON REMOVER 25 LTR
Unitor™ Carbonclean LT™ is a non-corrosive, powerful micro emulsion based cleaner for removal of carbonaceous deposits. Product number: 575696 and Unitor™ Carbon Remover™ is a heavy duty solvent cleaner ideal for removal of stubborn carbon deposits. Product number: 571604
2. AQUATUFF 25 LTR AND AIR COOLER/ RADIATOR CLEANER 25 LTR & ACC PLUS 25 LTR
Unitor™ Aquatuff™ is a heavy-duty water based alkaline cleaner. It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. Unitor™ Air Cooler or Radiator Cleaner™ is a powerful solvent emulsion cleaner for the cleaning of diesel engine air coolers, scavenging air systems and compressor sides of turbochargers. Unitor™ ACC Plus is a powerful cleaning agent for cleaning of diesel engine air coolers, scavenging air systems and the compressor side of turbochargers. Product number: 698704
3. DESCALEX 25 KG , CHEMCLEAN-05, NALFLEET SAF-ACID AND SULPHAMIC ACID
Unitor™ Descalex™ is a dry acid cleaner formulated to remove rust and scale deposits. It’s Sulphamic Acid based descaling /cleaning chemical. SAF-ACID is a special blend of sulfamic acid, wetting agents and a color indicator. The wetting agent enhances the action of the sulfamic acid in removing deposits by its surface-active cleaning properties. The color indicator provides a simple means for determining whether the strength of the SAF-ACID solution is adequate for effective, efficient cleaning. It is recommended for removing mineral scale deposits from evaporators, heat exchanger heat transfer surfaces, and boilers as well as removing iron deposits when used in combination with salt.
4. DESCALING LIQUID 25 LTR AND DESCALE IT 25 L/208 LTR
Unitor™ Descaling Liquid™ is a hydrochloric acid based product containing active descaling accelerators, corrosion-inhibitors and wetting agents in a highly efficient solution. DESCALE-IT is a liquid acid used to remove scale and corrosion deposits from heat exchangers and piping systems that eliminate costly downtime and expensive manual descaling. DESCALE-IT is recommended for descaling boilers, evaporators, condensers, heaters and coolers.
5. ULTRACLEAN GO 25 LTR
Ultraclean GO is a water-based high alkaline cleaner that is extremely powerful, developed for cleaning grease, fuel oil, lube oil, soot and combustion residues of filters, filter parts, machinery parts, pump components, inlet- and exhaust valves, etc. It is specially formulated for use in ultrasonic cleaning baths and other applications.
Core Equipment – Routine Cleaning
ACC/ME
ACC/ME is a patented, stable micro-emulsion cleaner, which, when sprayed on soiled parts of a marine diesel charge air cooler, penetrates and dissolves accumulated deposits, oil and grease. It can be used for “in-service” cleaning or by spraying or soaking air coolers out of service that does not contain any chlorinated solvents. Its features result in improved combustion, air cooling, and engine performance.
ACC-9
ACC-9 is Drew Marine’s traditional cleaner for air coolers. ACC-9 is a combination of non-abrasive, non-corrosive solvents, detergents and inhibitors. ACC-9 penetrates and dissolves accumulated deposits, oil and grease so they can be removed by blowing with compressed air or rinsing with a stream of water. ACC-9 is highly effective at removing deposits, oil, and grease from air coolers as well as all types of engine parts.
DREW ELECTRIC 2000
DREW ELECTRIC 2000 is a highly efficient, non-chlorinated solvent designed to be used in electric parts cleaning applications that require deep penetration with a controlled evaporation rate. It is economical to use and can be applied to large motors, generators, and electrical apparatus, as well as smaller equipment.
DREW ELECTRIC FAST DRY
DREW ELECTRIC FAST DRY is a highly efficient non-chlorinated solvent, specially designed for motor and electrical parts cleaning. It dissolves and cleans grease, tar, wax, and oil from electrical equipment and parts upon contact. It is safe on most metals, including aluminum, and insulation materials used in marine motors and switch gears.
SNC 2000
SNC 2000 is a hydrocarbon solvent blend that does not contain any cresylic acid or chlorinated solvents that are specially designed to remove baked on and carbonized soils on valves, burner tips and other engine parts and filters. SNC 2000 penetrates deposits and dissolves oil, grease, varnish and combustion products.
DREW FC
DREW FC is a non-corrosive filter cleaning agent that is used for the removal of partially carbonized oils using a circulation method. It is mainly used for the cleaning of permanently fixed oil coolers, oil preheaters and metal/ceramic oil filters. These units are regularly contaminated by particles in the oil and partially carbonized oils.
DREWFRESH 2000
DREWFRESH 2000 is a high-performing micro-emulsion cleaner containing biodegradable components. This patented composition is designed especially for removing difficult to remove baked-on oils, carbonized deposits and heavy greases.
CARBON REMOVER
CARBON REMOVER is a combination of highly active, fast-penetrating solvents with selected detergents and corrosion inhibitors designed to remove carbon deposits, varnish, gummy matter, etc., from diesel engine pistons, rings, valves and other parts where oil combustion fouling accumulates. It penetrates deposits and dissolves oil, grease, varnish and most products of incomplete combustion.
ENVIROCARE 370
ENVIROCARE 370 is a solvent-based coal tar solubilizer and emulsion cleaner, containing a blend of aromatic hydrocarbons and surface-active agents. It is used for the removal of coal tar, crude, benzene, bitumen and similar substances. It is an economical cleaner that can be used for cleaning heavily contaminated metal parts as well as for tank cleaning.
AMEROID DC
AMEROID DC is a specially formulated blend of surfactants, solvents and acids designed to remove carbonaceous and varnish deposits from lube and fuel oil separator discs. It has proven its effectiveness when fuel incompatibility and increased sludge formation occur.
ENVIROMATE 2000
ENVIROMATE 2000 is a water-based cleaner formulated to meet the marine industry’s safety and performance requirements. Through its unique blend of cleaning agents, it is a non-flammable, general purpose cleaner perfect for a broad range of surface, deck, engine, and offshore applications. It is also recommended for ultrasonic cleaning applications.
Major Equipment Cleaning – Upsets
FERROCLEAN
FERROCLEAN is a unique, patented, highly effective water-based cleaner containing penetrating, dissolving and dispersing agents. It removes, dissolves and disperses iron oxide deposits from diesel cooling water systems while providing a temporary passivating film to protect the base metal from corrosion.
HDE 777
HDE-777 is a low-foaming solvent emulsifier cleaner used for cleaning marine equipment that is seriously contaminated with fuel or lubricating oils. Oil deposits can be removed from boilers, L.P. steam generators, etc. HDE-777 emulsifiers should never be used as an on-line cleaner; all cleaning should be done off-line.
ENVIROMATE 2000
ENVIROMATE 2000 is a water-based cleaner formulated to meet the marine industry’s safety and performance requirements. Through its unique blend of cleaning agents, it is a non-flammable, general purpose cleaner perfect for a broad range of surface, deck, engine, and offshore applications. It is also recommended for ultrasonic cleaning applications.
EDGE
EDGE is a multi-purpose heavy duty cleaner specifically formulated to meet the marine industry’s requirements for cleaning action, safety and environmental considerations. This product combines heavy-duty cleaning ingredients with fast penetrating wetting agents to provide the power needed to remove stubborn soils while remaining mild enough not to harm most surfaces.
DREWCLEAN 3000
DREWCLEAN 3000 is a heavy duty liquid degreaser that easily removes fresh and aged oily soils. It is recommended for cleaning and degreasing engine rooms, tank tops, and bilges, as well as for cleaning bulkheads and other shipboard surfaces from grease and oily soils. It is non-corrosive, contains no chlorinated solvents or surfactants and consequently can be safely used on painted and unpainted metal surfaces.
O&GR
O&GR oil and grease remover is a blend of active cleaning agents and emulsifying solvents. It penetrates and dissolves grease, oil and grimy soils forming a soluble mixture that can be rinsed away with water. O&GR can be used as a cleaner for metal, parts and tools, painted and unpainted surfaces, decks, bulkheads, machinery, engines and wherever grease, oil and grimy soils are a problem.
AMEROID OWS
AMEROID OWS is a quick separating, superior solvent emulsifying detergent for general engine room degreasing and for cleaning and gas freeing of bilges. AMEROID OWS breaks quickly and does not harm the operation of oily water separators required under the MARPOL regulations.
AMEROID RSR
AMEROID RSR is a liquid combination of rust- dissolving acid, an emulsifier and a passivator for removing rust and rust stains, and passivating iron and steel surfaces.
DREWTAN RC
DREWTAN RC is non-flammable and can be used on rusted steel and sand-blasted steel as a pre-coating preparation that forms a water-insoluble black film that prevents moisture from penetrating into the metal surface. It is compatible with most paint types and coating systems, such as alkyd systems, modified alkyds, chlorinated rubber, epoxies, polyurethanes, and vinyls.
CREWCAREDM HC
CREWCAREDM HC is a powerful hand cleaner formulated with aloe vera extracts, jojoba esters and citrus oils that removes extremely stubborn industrial soils such as lubricants, grease, varnish, ink, tar, bitumen and adhesives. The action cleans and conditions the skin and aids in the removal of soils.
These formulations are specially formulated to effectively remove oil, grease and grime from internal boiler systems. It lessens the hardness of the scale accumulated on the boiler walls and ensuring its efficient removal. It is preferred owing to its precise pH value, non corrosive nature, and its ability to remove deposited silica, and reduction of labor costing and easy application. It is known for its corrosion inhibition on common metals like Mild Steel, Stainless Steel, Cast Iron, Copper, Cu-Alloys and Aluminium.
Key Features and Benefits
- Reduce the cleaning time
- Precise pH value
- Improvise the surface wetting power
- Non-foaming
- Maintenance free
- Environment friendly
- Hard water tolerant
- Material friendly including Copper, PVC, PEX, galvanized surfaces, Stainless Steel
Multi-functional boiler Chemicals
Multi-functional boiler treatment additives, work as a single dosing chemical, imparting all necessary functions, formulated for ease of user and small / medium size boilers. These chemicals inhibits scale formation, prevents corrosion, removes dissolved oxygen, forbids sludge and iron oxide build ups, benefitting to single product dosing and inventory.
Key Features and Benefits
- Single product, multiple application
- Prevents scale formation, corrosive deposition, sludge build ups
- Incorporated with wetting agent for deep scale penetration
- All organic formulation
- Reduces maintenance cost and number of shutdowns for cleaning
- Reduces energy cost by keeping all exchanger surfaces clean, improving heat transfer efficiency
- Cost effective use concentration
Product Range
Boiler antiscalant chemicals
Boiler antiscalant chemicals are multipurpose heavy-duty chemicals used for removal of scales, rust inside boiler systems. It effectively removes heavy deposits of water scale and iron oxides. It has the ability to remove lime, rust deposits and oily contaminants. Utilizing these products increases the life cycle of boiler protection resulting savings of cost due to less boiler downtime and energy savings due to the absence of scale.
Boiler Antiscalant is used for the purpose of deterrence of scaling and elimination of boiler deposits. It can also adjust the pH of the water which in turn prevents corrosion of tubes. Boiler antiscalant and boiler water pH booster increases the productivity of the plant that saves energy. Effective antiscalants are profitable for users for its round the year savings of power and labor, and increase in production. Use of antiscalant is a prime necessity to cope up with the huge production targets.
Key Features and Benefits
- Excellent cleaning efficacy
- Prevents scale formation
- Wetting agent for deep scale penetration
- Precipitated calcium salts, iron and silica are conditioned and kept free flowing
- Additional dispersants to fluidize the scale forming material
- Excellent removal of oil and grease
- Non-adherent and free flowing sludge does not form deposits on the internal surface
- Reduces maintenance cost and number of shutdowns for cleaning
- Reduces energy cost by keeping all exchanger surfaces clean, improving heat transfer efficiency
Also Supplies bellow Chemicals
Boiler Feed Water Treatment Chemicals